🛠️ Cardiac Permanent Spoof Guide

This guide will walk you through permanently spoofing your HWID using RAID 0 setup, BIOS flashing, and the Cardiac HWID Tool.

⚠️ Follow carefully to ensure a clean, undetected setup.

🧾 Step-by-Step Instructions

  1. Prepare a clean USB drive (8GB or larger). Format it to FAT32 or NTFS.
  2. Download your BIOS update from your motherboard manufacturer’s website. Use your exact model number.
  3. Flash your BIOS:
    • Copy the BIOS file to the USB.
    • Reboot and enter BIOS: DEL/F2 (ASUS/MSI/Gigabyte), F10 (HP), or F12 (Dell).
    • Use built-in tools: EZ Flash / M-Flash / Q-Flash.
    • Video Example
  4. Use the Media Creation Tool to make a bootable Windows USB.
  5. Download RAID drivers from your motherboard support page and copy them to the USB.
  6. Enter BIOS and configure RAID 0:
    • Change SATA Mode from AHCI → RAID.
    • Create RAID 0 array.
    • Video Guide
  7. Boot from your Windows USB. During install, load RAID drivers if Windows doesn't detect drives.
  8. Install Windows normally.
  9. Run the Cardiac HWID Tool and click Spoof All.
  10. Restart — you're done. 🎉

💡 Additional Tips